-
Burners AccessoriesTechnical Specifications
| Property | Value |
|---|
| Type | Plug-in wiring base (socket) for a burner control box |
| Function | Connects the control box to the supply, motor, ignition, fuel valve and flame sensor |
| Fitting | Wired permanently into the burner; the control box plugs on top |
| Uses | Oil and diesel burners on boilers, ovens, dryers and heaters |
-
Burners AccessoriesTechnical Specifications
| Property | Value |
|---|
| Type | Burner control box (flame safeguard) |
| Function | Controls purge, ignition, fuel valve and flame monitoring |
| Fault handling | Safety lockout, with a manual reset button |
| Fitting | Plugs into a matching wiring base on the burner |
| Uses | Oil and diesel burners on boilers, ovens, dryers and heaters |
-
Burners AccessoriesTechnical Specifications
| Property | Value |
|---|
| Type | Burner fuel (oil line) filter |
| Function | Removes dirt, rust and sludge from diesel before the burner pump |
| Position | In the oil line, between the tank and the burner pump |
| Fuels | Diesel (light fuel oil) and kerosene |
| Uses | Oil burners on boilers, ovens, dryers and heaters |
-
Burners AccessoriesTechnical Overview
| Item | Details |
|---|
| Product | Burner HT (high-tension) ignition cable |
| Function | Carries high voltage from the ignition transformer to the ignition electrodes |
| Used on | Oil and diesel burners with transformer and electrode ignition |
| Typical burners | Domestic, commercial and industrial burners, including Riello and Baite models |
| Works with | Burner ignition transformers and burner electrodes |
| Supply | Sold by Wisdo Merchants, Industrial Area, Nairobi |
-
Burners AccessoriesTechnical Specifications
| Property | Value |
|---|
| Type | Burner ignition transformer |
| Function | Steps mains voltage up to a high-voltage ignition spark |
| Output | High-voltage spark across the ignition electrodes |
| Fitting | Mounted on the burner, connected to the electrodes by HT leads |
| Uses | Oil and diesel burners on boilers, ovens, dryers and heaters |
-
Burners AccessoriesTechnical Specifications
| Property | Value |
|---|
| Type | Burner motor |
| Function | Drives the combustion fan and the fuel pump |
| Drive | Shaft to fan wheel, with a coupling to the fuel pump |
| Uses | Oil and diesel burners on boilers, ovens, dryers and heaters |
-
Burners AccessoriesTechnical Specifications
| Property | Value |
|---|
| Type | Pressure-atomising oil burner nozzle |
| Sizes available (GPH) | 1.0, 1.5, 1.75, 2.0, 2.5, 3.5, 4.0, 6.0, 8.0, 10.0, 12.0 |
| Spray angle | 60° (all sizes) |
| Flow rating | US gallons per hour (GPH), at the rated test pressure |
| Fuels | Diesel (light fuel oil) and kerosene |
| Uses | Oil burners on boilers, ovens, dryers and heaters |
-
Burners AccessoriesTechnical Specifications
| Property | Value |
|---|
| Brand | Suntec |
| Series | AS (single-stage, with built-in solenoid valve) |
| Models in stock | AS47A, AS47C, AS67C |
| Fuels | Light fuel oil (diesel) and kerosene |
| Viscosity range | 2 to 12 cSt |
| Nozzle pressure, AS47 | 7 to 14 bar range |
| Nozzle pressure, AS67 | 10 to 15 bar range (factory set at 10 bar) |
| Maximum speed | 3,600 rpm (AS47); 2,850 rpm (AS67) |
| Installation | One-pipe or two-pipe |
| Maximum suction vacuum | 0.45 bar |
